Filter
Top Products
Printed image is smeared.
Cause What to do
The paper thickness lever or
the adjust lever position may
not be set correctly.
Make sure the paper thickness lever
and adjust lever positions are set
correctly. See page 4-2.
Special paper was loaded
without the support sheet or
a regular sheet of paper
under it.
Load the support sheet or a piece of
plain paper under the special paper.
Multiple sheets of EPSON
Photo Quality Glossy Film
are loaded.
Load glossy film one sheet at a time
with the loading support sheet or a
piece of plain paper under the glossy
film.
If you need to load multiple sheets of
glossy film, load only up to 30 sheets
and set the top margin of the page to
30 mm or more.
Ink has leaked on the platen. Wipe the inside of the printer with a
soft, clean cloth.
w
Warning:
Be careful not to touch the gears inside the
printer.
02-A
L
Hudson++ Ref. Guide
Rev.d
A5 size Chapter 6
04-30-98 DR, pass 3
6-16
Troubleshooting