Filter
Top Products
1 • Installation
24
Connecting to a High-End Workstation
Although the PowerLite 7000XB has a maximum resolution of
1024
×768 pixels, it’s capable of remapping input resolutions up to
1280×
1024 pixels. Since 1028
×
1024 pixels is the default resolution
for most leading workstations, this capability makes the PowerLite
7000XB the best portable solution for the display of workstation video
output.
There is no standard for workstation video output. Those workstations
that follow the SVGA standard and use the HD15 connector don’t
need an adapter cable. The most popular workstations use a 13-pin
13W3 connector, which requires an adapter cable (part number
ELPKC06).
In addition, workstations pass the Sync signal differently, so the
ELPKC06 adapter cable has a dip switch to control sync routing.
Contact your audio/video dealer for information on connecting your
workstation.
Connecting to a Video Source
You can connect a VCR, a camcorder, a laser disc player, or any other
compatible video image source to your projector.
The projector can receive composite video or S-Video. Your
equipment has composite video if your video source has a one-pin
RCA video jack. Your equipment has S-Video if your video source has
a four-pin video jack.
pro-ch1.fm Page 24 Friday, November 7, 1997 5:22 PM