Filter
Top Products
Epson PowerLite 6110i
6 12/07
Turning Off the Projector
When you’re finished using the projector, follow the steps
below to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
Note: When the projector has not received any input signals for 30
minutes, it automatically turns off the projection lamp and enters
“sleep mode.” This conserves electricity, cools the projector, and
extends the life of the lamp. If you want to start projecting again,
press the P Power button. If you are done using the projector,
unplug the power cord. To turn off sleep mode, see the
User’s Guide.
Turn off this product when not in use to prolong the life of the
projector.
1. Turn off and disconnect any equipment plugged into the
projector.
2. To turn off the projector, press the P
Power button twice.
3. When the P Power light is steady orange, you can unplug
the projector.
4. With Epson’s exclusive Instant Off
®
technology, there’s no
cool-down period. When you’re done, just unplug the
projector.
Caution: To avoid damaging the projector or lamp, never unplug
the power cord when the P Power light is green or flashing orange.
Adjusting the Image and Presentation
The following sections describe how to adjust the image and
control your presentation.
Focusing and Zooming Your Image
Open the lens access door, then do the following:
❏ Use the
Focus ring to sharpen the image.
❏ Use the
Zoom ring to reduce or enlarge the image. Move
the ring toward the
W to increase the size, or toward the T
to decrease it.
If the image still isn’t large enough, you may need to move
the projector farther away from the screen. You can also use
the
E-Zoom buttons on the remote control to zoom in on a
portion of the image. See page 8 for instructions.
Adjusting the Height of Your Image
If the image is too low on the screen, you can use the front
adjustable feet to raise it.
1. Lift the front of the projector and turn the front feet to
adjust the position of the projected image.
Power button
Zoom ring
Focus ring
Turn to adjust
image height