Filter
Top Products
A794 Owner’s Guide Chapter 6: Programming Information
March 1999 95
Select or Cancel Automatic Status Back (ASB) (continued)
Default 0 (ASB disabled)
Exceptions
If n = 0, ASB is disabled.
Related Information
When the printer is disabled by the Select Peripheral Device command (1B 3D), this
command (Enable/Disable Automatic Status Back) is disabled but Automatic Status
Back is not disabled.
When Auto Status Back (ASB) is enabled using this command, the status transmitted by
other commands and the ASB status be differentiated according to the information
found in Recognizing Data from the Printer, (in the Real Time Commands section in this
document). The status bytes to be transmitted are described in the following four tables.
First Byte (Printer Information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to off.
1 Off 00 0 Not used. Fixed to off.
2Off
On
00
04
0
4
One or both cash drawers open.
Both cash drawers closed.
3Off
On
00
08
0
8
Not Busy at the RS232C interface.
Printer is Busy at the RS232C interface.
4 On 10 16 Not used. Fixed to on.
5Off
On
00
20
0
32
Cover closed.
Cover open.
6Off
On
00
40
0
64
Paper feed button is not pressed.
Paper feed button is pressed.
7 Off 00 0 Not used. Fixed to off.