Filter
Top Products
Chapter 6: Programming Information A794 Owner’s Guide
March 199958
Set Line Spacing
Sets the line spacing to n/406 inch (n/16 mm).
The minimum line spacing is 8.5 lines per inch. The line spacing equals the character
height when n is too small.
If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to
change the horizontal and vertical minimum motion unit, the parameters of this
command (Set Line Spacing) will be interpreted accordingly.
ASCII ESC 3 n
Hexadecimal 1B 33 n
Decimal 27 51 n
Value of n n/406 inch
Range of n 0-255
Default 0.13 inch (3.37 mm)
Related Information
For more information, see the description of the Set Horizontal and Vertical Minimum
Motion Units command in this document.
Print and Feed Paper
Prints one line from the buffer and feeds the paper n/203 inch (n/8 mm). The line
height equals the character height when n is too small.
If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to
change the horizontal and vertical minimum motion units, the parameters of this
command (Print and Feed Paper) will be interpreted accordingly.
ASCII ESC J n
Hexadecimal 1B 4A n
Decimal 27 74 n
Value of n n/203 inch
Range of n 0-255
Related Information
For more information, see the description of the Set Horizontal and Vertical Minimum
Motion Units command in this document.