Filter
Top Products
Chapter 6: Programming Information A794 Owner’s Guide
March 199990
Transmit Printer ID
Transmits the printer ID specified by n. This command is a batch mode command; that
is, the response is transmitted after all prior data in the receive buffer has been
processed. There may be a time lag between the printer receiving this command and
transmitting the response, depending on the receive buffer status.
When Auto Status Back (ASB) is enabled using the Enable/Disable Automatic Status
Back command (1D 61), the status transmitted by this command (Transmit Printer ID)
and the ASB status must be differentiated according to the information found in
Recognizing Data from the Printer, (in the Real Time Commands section in this
document).
ASCII GS I n
Hexadecimal 1D 49 n
Decimal 29 73 n
Value of n 1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
n Printer ID Specification ID (Hexadecimal)
1, 49 Printer model ID Axiohm A794 0x24
2, 50 Type ID Installed options Refer to next table
3, 51 ROM version ID ROM version 0x00
Type ID (
n
= 2)
Bit Off/On Hex Decimal Function
0Off
On
00
01
0
1
No two-byte character code installed.
Two-byte character code installed.
1Off
On
00
02
0
2
No knife installed.
Knife installed.
2 - - - Undefined.
3 - - - Undefined.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.