Filter
Top Products
Chapter 6: Programming Information A794 Owner’s Guide
March 199948
Perform Partial Knife Cut
Partially cuts the receipt. The length of the cut can be changed through the
configuration menu. The default setting leaves .20 inches (5 mm) of paper on the left
edge. See Setting Partial Cut Distance in Diagnostics.
There are two codes for this command. Both codes perform the same function.
ASCII SUB ESC m
Hexadecimal 1A 1B 6D
Decimal 26 27 109
Formulas
The cut edge is 144 dot rows or .71 inch (18 mm) above the print station.
Exceptions
The command is valid only at the beginning of a line.
Generate Tone
Generates an audible tone
ASCII ESC BEL
Hexadecimal 1B 07
Decimal 27 7