Filter
Top Products
SelecType Overview
SelecType Level 2 functions
TEST PRINT
MODE ASSIGN
Prints two test patterns.
Chooses one of the emulation modes: HP
LaserJet III’, Epson LQ, Epson FX, or (with the
optional identity card installed) Epson GL.
Configures the parallel and serial interfaces.
Chooses the size of the receive buffer,
I/F CONFIG
RX-BUFFER SIZE
CH
CH TIMEOUT
AUTO CONT
P-CONFIG SAVE
FACTORY RESET
VERSION
PAGE COUNTER
STANDBY
Channel mode. Sets the interface channels to
auto-sense or individual.
Channel time out. If no data is sent during the
specified time period, the printer switches
from one channel to the other.
Automatic continue. Permits the printer to
continue printing instead of stopping under
certain error conditions.
Printer configuration save. Saves all Level 2
settings.
Returns all Level 1 and Level 2 settings to their
factory settings.
Displays the version numbers of the printer’s
controller and font.
Displays the total number of sheets printed by
the printer and the number by the current
photoconductor unit.
Conserves power by reducing power to the
fixing heater when the printer is not used for
30 minutes.
4-4
SelecType