Filter
Top Products
SelecType Options
Press to execute the save and initialize operation. Your settings
are now saved and also are in effect every time you turn the printer
on.
CH TIMEOUT 60
10 to 600 (in steps of 10)
This option sets the time for a channel timeout. If the printer is on
line and no new data is sent for the number of seconds specified, and
there is data in the other channel, the printer automatically switches
from the current channel to the other. The factory setting is 60.
AUTO CONT.
OFF
ON
* OFF
When automatic continue is set to on, the printer automatically
continues to print after a certain period of time when one of the
following errors occurs: SET FULL PRINT, PAGE BUFFER FULL,
PAPER SIZE ERROR, TRAY SET XXX, and INSUFF MEMORY.
When this option is off, you must press the
CONTINUE
button to
resume printing. In most cases, leave this option set to off.
P-CONFIG.
SAVE
This option (printer configuration save) is similar to the SAVE
MACRO and POWERON MACRO options in Level 1. Use it to save
settings you make in Level 2 so they take effect each time you turn
on the printer.
SelecType
4-31