Filter
Top Products
Figure 1-5.
Directing the
ribbon
6.
Replace the front lid by inserting its legs into the slots near the front
corners of the printer. Lay the lid down and press to snap it into
place.
Replacing the Ribbon
When your printing becomes light and you need to replace the
ribbon, follow these steps:
1. Remove the front lid.
2. Grasp the ribbon cartridge handle and pull out the cartridge.
3. Follow the ribbon installation instructions above to insert the new
ribbon cartridge.
Plugging in the Printer
Now plug in your Apex80. Make sure that the power switch on the
left side of the printer is off before you plug in the printer.
1-6
Setting Up