Filter
Top Products
3. When the legs are in the slots, lean the guide all the way back. The
guide should rest atop the paper entering the printer, separating it
from paper exiting the printer.
Setting top of form
Now you are ready to set the top of form position. Follow these
steps:
1. Turn the paper feed knob to advance the paper until a perforation
between pages is just below the top of the ribbon,
2. Now replace the front lid.
Your printer should now be set up as shown in Figure 1-15.
Figure 1-15.
The
printer with
continuous-feed paper
When you turn on your Apex80, it remembers this top of form
setting and uses it when any program tells it to move to the top of the
next page. If you later find that your word processing or other
application program prints too high or too low on the page or is
printing on the perforations, check to see that your top of form setting
is correct.
1-14
Setting Up