Filter
Top Products
ESC f
Horizontal/Vertical Skip
Format:
ASCII code:
ESC f n s
Decimal:
27
102 n s
Hexadecimal: 1B
66 n s
Comments:
Prints spaces or line feeds without carriage returns. When n is 0, s
spaces will be inserted up to a maximum of 127. If n is set to 1, s line
feeds will be performed.
Horizontal tabbing
HT
Tab Horizontally
Format:
ASCII code: HT
Decimal:
9
Hexadecimal: 09
Comments:
Advances the print position to the next horizontal tab setting. The
default settings are at intervals of eight characters in the default pitch,
and tab positions are not affected by subsequent changes in character
pitch.
ESC D
Set Horizontal Tabs
Format:
ASCII code:
ESC
D
n1
n2
...
NUL
Decimal:
27 68
n1
n2
...
0
Hexadecimal:
1B
44
n1
n2
...
00
Comments:
This command allows setting of up to 32 horizontal tabs, which are
entered as nl, n2, n3, etc. (from 1-137) with the NUL character or
any value less than the previous one terminating the command.
ESC D NUL clears all tabs. The settings on power up or after an
ESC @ command are every eight characters. The tab settings do not
change if the character pitch is changed.
A-18
Command Summary