Filter
Top Products
Configuring the printer
3-13
S Paper Exit (only for single sheet paper)
Printer CI - 4040: the output will be done in the manual input path. It is
possible to choose between FRONT SIDE/KEY and
FRONT SIDE if the manual front insertion guide is
mounted.
Printer CI - 4050: it is possible to choose between STACKER, FRONT SIDE,
and FRONT SIDE/KEY (manual front insertion). The
desired paper exit can be selected via operator panel or
software.
Note: If you choose the paper exit FRONT SIDE/KEY you have to confirm each
output with a keystroke on . That is a useful option when using
automatic sheet feeding which could cause a paper jam. As opposed to
feeding automatically the ASF will only feed after a keystroke has been
received.
S Emulation
The emulation determines the set of commands available for the printer (see
Appendix D and E). You can activate the following emulations:
S EPSON LQ
S IBM PROPR.
S IBM PROPR.AGM
Note: The selected Emulation will also be stored in the actual macro. With a
change of the macro (e.g. key , , or is pressed) it is
possible that the emulation will also be changed. Be careful: Do not
change the emulation within an application.
S Character Set
When selecting a character set it can be further specified by the
corresponding national variants.
Detailed print samples are found in Appendix B and the Character Set
Tables in Appendix C.
If a different macro is selected the default character set may change,
e.g. - IBM PROPR. emulation has the character set IBM SET 2 as default.
- EPSON emulation has the character set EPSON EXT.GCT as default.