Filter
Top Products
Configuring the printer
3-14
S Line Mode
If LF = LF + CR is selected, the printer performs a carriage return (CR) for
every line feed (LF) received by the interface.
If CR = LF + CR is selected, the printer performs a line feed (LF) for every
carriage return (CR) received by the interface.
S $$ Commands
This function causes $$ either to be printed as $$ or to activate ESC
commands within an application.
If this function is set to YES the characters are interpreted by the printer in the
following way:
S $$ like ESC [
S $$/ like ESC.
S Tear-off-mode (only for fanfold paper)
There are four possible settings within this mode:
S NO
S YES 10 SEC.
S YES 1 SEC.
S NO, SPECIAL
The NO SPECIAL setting is to be used with critical forms which cannot
handle the return movement of the paper.
With the YES setting the printer waits for one ore ten seconds and, unless
further data is received, moves the paper to the first perforation after the text.
Regardless of this setting, whenever changing from fanfold to the manual
paper source, the printer will request the fanfold paper to be torn off or at the
setting NO SPECIAL to be removed before the paper is moved to the park
position.
S Pre-separation (is used for the ASF cassettes (printer CI - 4050) only)
During normal printing, a sheet of paper is not inserted from an ASF cassette
before the preceding sheet has been ejected. By selecting
PRE-SEPARATION = YES the sheets follow each other more closely, thereby
increasing the printer's throughput.