13
Copying
Follow the instructions in these sections to use your CX6600 as a stand-alone copy
machine.
■ “Copying Without a Computer” below
■ “Changing Copy Settings” on page 14
Copying Without a Computer
1. Open the scanner lid.
2. Place your document face-down on the glass, in the upper-left corner. Move
your document about 1/8 inch from the top and side edge so your entire
document is scanned.
Note:
If you place your document against the guides, the edges next to the guides won’t
be copied.
If you need to copy a thick document, such as a book, you can remove the scanner
lid. Gently press down the original to keep it flat on the document table. Be sure to
replace the scanner lid when you’re finished.
Move the document
about 1/8 inch from the
edges to avoid cropping