Filter
Top Products
30 Scanning to a Card
Scanning to a Card
Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your CX6600 is not connected to your computer (or your
computer is turned off), then insert a memory card (see page 20).
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the LCD screen to format the card. Any data stored on the
card will be erased.
2. Press the Scan button to enter Scan Mode.
3. Press the green button next to the LCD screen until
To Photo Card appears,
then press
OK.
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. Select either To PC or To E-mail, then see your on-screen Reference
Guide for details.
4. Select the document type (Text or Graphic).
5. Select
Auto as the scan area. (If the edges of
your document are light in color, they may
not be detected and part of your image may
be cut off; in that case, select Max. to scan
the entire area.)
6. For ordinary documents, select
Normal as
the quality of the scanned image. For
higher quality, select either
Fine (for text)
or
Graphic (for photos).
Note:
Higher quality images take up more space on the memory card.
7. Press the button next to OK (shown on the LCD screen).
8. Make sure your original document is placed on the scanner glass, then press
the x
Color button to start scanning. Your image is saved to the “epscan”
folder on the memory card.
Caution:
Never open the scanner while scanning or copying, or you could damage the
CX6600.
9. Wait until scanning finishes and the memory card light stops flashing, then
remove the card.
Scan area
Image quality
Document type