Filter
Top Products
Epson Stylus CX9400Fax Series
14 8/07
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You
must install new cartridges immediately after removing the old
ones. Use the following part numbers when you order or
purchase new ink cartridges:
Note:
We recommend that you use genuine Epson cartridges and do not
refill them. The use of other products may affect your print quality
and could result in printer damage.
Yields vary considerably based on images printed, print settings,
paper type, frequency of use, and temperature. For print quality, a
small amount of ink remains in the cartridge after the “replace
cartridge” indicator comes on. The printer ships with full cartridges
and part of the ink from the first cartridges is used for charging the
printer.
For best printing results, use up a cartridge within six months of
opening the package.
Store ink cartridges in a cool, dark place. If you bring them inside
from out in the cold, allow them to warm up to room temperature
for at least 3 hours before using them.
Caution:
Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a
replacement, or the ink remaining in the print head nozzles may dry
out.
1. Turn on the Epson Stylus CX9400Fax Series.
If a cartridge is low or expended,
you see a message on the display
screen. Note which cartridges
need to be replaced and press
OK.
If you’re replacing a cartridge
before you see a message on the
display screen, press the
Setup
button, select
Maintenance,
and press
OK. Then select
Change Ink Cartridge and press OK.
2. Open the scanner, then open the cartridge cover.
3. Squeeze the tab on the
cartridge and lift it up.
Dispose of it carefully. Do
not take the used cartridge
apart or try to refill it.
Warning:
If ink gets on your hands, wash
them thoroughly with soap and
water. If ink gets into your eyes,
flush them immediately with
water. Keep ink cartridges out
of the reach of children.
4. Shake the cartridge several times, then remove it from the
package. Do not to touch the green chip on the side.
5. Remove the yellow tape from
the bottom of the ink cartridge.
Caution:
Do not remove any other labels or
seals, or ink will leak.
Ink color Part number
Black 69 or 68 (High Capacity)
Cyan 69
Magenta 69
Yellow 69