Filter
Top Products
ESC N
Format:
Set Skip Over Perforation
ASCII code: ESC N n
Decimal:
27 78 n
Hexadecimal: 1B 4E n
Comments:
The variable n is the number of lines skipped between the last
line printed on one page and the first line on the next page. For
example, with the standard settings for line spacing (1/6-inch),
and page length (66 lines), ESC N 6 causes the DFX to print 60
lines and then skip 6. DIP switch 2-3 performs the same
function. This setting is cancelled by ESC O and also by ESC C
or ESC C 0. The value of n must be from 1 to 127.
ESC O
Format:
Cancel Skip Over Perforation
ASCII code: ESC O
Decimal:
27 79
Hexadecimal: 1B 4F
Comments:
Cancels the skip over perforation set by ESC N. Overrides the
setting of DIP switch 2-3.
Line feeding:
LF
Format:
Line Feed
ASCII code: LF
Decimal:
10
Hexadecimal: 0A
Comments:
When this command is received, the data in the print buffer is
printed and the paper advances one line in the current line
spacing.
8-14
Command Summary