Filter
Top Products
32
Configuration Menu Functions
"Image" menu
Seven different settings can be selected for the Color Mode, to match the images being projected or the
projection environment. p.18
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
Adjust this when the output level of the connected equipment is weak and you feel that images are dark.
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
This adjusts the color intensity for the images.
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
This adjusts the image tint.
This adjusts the image sharpness.
The adjustment results are applied to the entire image.
This can be used to adjust a specific region. p.23
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
This adjusts the overall tints of the images.
If you select a higher value, images appear bluish, and if you
select a lower value, images appear reddish. The absolute color temperature can be set to one of 12
settings within the range of 5000K to 10000K.
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
This adjusts the skin tones of people who appear in the images. If you select a higher value, green tone is
increased, and if you select a lower value, red tone is increased.
(Adjustment is not possible when "Color Mode" is set to "x.v. Color".)
This adjusts gamma. You can select a value, or make adjustments while viewing an image or a graph.
p.20
This lets you adjust the offset and gain for each of the R/G/B color components. p.22
Displayed for input sources other than computer image
Color Mode
*1
Brightness
*2
Contrast
*2
Color Saturation
*2
Tint
*2
Sharpness
*2
Standard
Advanced
Abs. Color Temp.
*2
Skin Tone
*2
Advanced
Gamma
*1
RGB
*1
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and color mode setting.