Filter
Top Products
35
Configuration Menu Functions
Configuration Menu
(This setting can be made only when a 1080p/24Hz signal is being input to the [Component] or
[HDMI1], [HDMI2] input terminals.)
For a 1080p/24Hz input signal, you can select between 2-2 pull-down projection or 2-3 pull-down
projection. Selecting "On" sets the 2-2 pull-down.
(This setting can be made only when 480i, 1080i/60Hz or 1080p/24Hz signals are being input to the
[Component], [HDMI1] or [HDMI2] input ports or when NTSC, M-PAL or PAL60 signals are being
input to the [Video] or [S-Video] input ports.) You can select whether images are projected with the 4-4
pull-down or the 2-3 pull-down. The default setting is different depending on the input signals. When set
to "On", images are projected with 4-4 Pull-down. However, set to "Off" if the projection images are not
smooth when signals other than 1080p/24Hz are being input.
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts
images to their optimum condition when the input signal is changed. The three automatically adjusted
items are "Tracking", "Position" and "Sync."
(Setting is not possible when "Color Mode" is set to "x.v. Color.")
This reduces flickering of images.
Three modes are available. Select the mode to suit your liking.
Set "Off" when the image source, such as DVD, contains little electrical interference.
This reduces the noise which can be generated around the edges of images when projecting MPEG
images. Three modes are available. Select your preferred mode.
Set to "ON" to reduce block noise which can occur when projecting MPEG images which have been
compressed at a low bit rate.
(This can be set when NTSC
signals are being input from the [Video] / [S-Video] input ports, or when
component video signals are being input from the [Component] input port.)
If using products designed for destinations such as South Korea that have different black level (setup
level) settings, use this function to obtain correct images. Check the specifications of the connected
equipment when changing this setting.
(
Setting is only possible when Color Mode is "Natural", "Theatre", "Theatre Black 1", or "Theatre Black
2", and composite video, S-video, or component video signals are being input.)
If bright white areas of images such as clouds and T-shirts on the beach in summer appear uneven and
overexposed, set to "On". When set to "On", the "HDMI Video Range" setting will be ignored.
Displayed for input sources other than computer image
Only displayed for Computer image input (does not appear when signals from the [HDMI1] /[HDMI2] input port are being input)
2-2 Pull-down (EH-TW3500/TW2900 only)
4-4 Pull-down (EH-TW4500/TW4400 only)
Auto Setup
Advanced
Noise Reduction
*1
Mosquito NR (EH-TW4500/TW4400 only)
Block NR (EH-TW4500/TW4400 only)
Setup Level
*1
EPSON Super White
*1
*1 The setting values are stored separately for each image source and signal type.