Filter
Top Products
Diskette Drive Problems
A
newly-installed diskette drive is not working properly.
Make sure you have installed the drive correctly and check all
the cable connections.
You see a diskette drive error when you
start
your computer.
Run the SETUP program and configure your system for the
correct type of diskette drive.
The diskette drive is
making
loud or unusual noises.
Contact your service representative or Epson Direct.
Hard Disk Drive Problems
A
newly-installed hard disk drive is not working properly.
Make sure you have installed the drive correctly and check all
cable connections. Also, check the jumper settings on your
drive.
You see a hard
disk drive error when you
start your
system.
Run SETUP and update your system configuration for the hard
disk drive. Make sure you selected the correct drive type.
Make sure the jumpers on the system board are set correctly.
See Chapter 3 for jumper information.
6-8
Troubleshooting