Filter
Top Products
Defining your own drive type
If the parameters for your hard disk (listed in its
documentation) do not match any of the types listed in the table
above, you can define your own type. Follow these steps:
1.
2.
3.
4.
Move your cursor to
Hard Disk 1
or 2 and press + or -
until you see drive type 48 or 49.
Press to move the cursor to the
Cyl
field.
Type the appropriate cylinder value for your hard disk. The
documentation that came with your hard disk drive will
provide the appropriate information.
Continue pressing to move the cursor to the next field and
type in the appropriate values,
If you are installing Epson-supplied drives, use the information
in the following table to define your drive type.
Epson-supplied hard disk drive types
l Actual formatted size may be slightly different than size on drive label.
**
If you have one of these hard disk drives, make sure you set the Shadow
BIOS ROM
OptiOn to
WP-Shadow
or
Cacheable.
Setting Up Your System
1-15