Filter
Top Products
39
Maintenance
Appendix
Remove the old air
filter.
Install the air filter cover.
Make sure that it faces the
correct way.
Insert the new air filter.
Place your finger under one of
the ribs and lift up.
Loosen the lamp fixing
screws.
Remove the old lamp.
Install the lamp cover,
then tighten the lamp
cover fixing screws.
Remove the lamp
cover.
Pull out straight.
Lift up slightly from
underneath to remove.
Install the lamp and the lamp cover securely. The lamp will
not turn on if the lamp or the lamp cover is not installed
correctly.
Dispose of used lamps properly in accordance with your
local regulations.
Select "Lamp - Hours Reset"
from the "Reset" menu.
Select "Yes" and then
press .
TW200-E.book Page 39 Monday, September 1, 2003 5:19 PM