Filter
Top Products
5
Part names and Functions
Remote Control
Buttons with no explanation function in the same way as the corresponding buttons on the projector's
control panel. Refer to "Control Panel" for further details on these buttons.
•
••
•
Menu button p.23
•
••
•
Indicator
Illuminates when remote control
signals are being output.
•
••
•
On/Off buttons
Setup Guide
Press to turn the projector power on
and off.
•
••
•
Color Mode button p.8
Displays a selection menu for
selecting the colour mode.
•
••
•
Memory button p.12
Displays a selection menu for
selecting memory settings.
•
••
•
Aspect button p.8
•
••
•
Select/Line menu button
p.8, p.12, p.23
•
••
•
buttons
p.8, p.12, p.23,
Setup Guide
Press to select configuration menu and
selection menu items and adjustment
values and to adjust the zoom and focus.
•
••
•
Esc button p.23
Setup Guide
•
••
•
D4 button: Switches the input source
to the projector's [D4] port. The
signal changes as follows and the
"Input Signal" menu also
changes each time the button is
pressed.
•
••
•
InputA button: Switches the input
source to the projector's [InputA]
port. The signal changes as
follows and the "Input Signal"
menu also changes each time the
button is pressed.
•
••
•
InputB button: Switches the input
source to the projector's [InputB]
port.
•
••
•
S-Video button: Switches the input
source to the projector's [S-
Video] port.
•
••
•
Video button: Switches the input
source to the projector's [Video]
port.
YPbPr
YCbCr
YPbPrYCbCr
RGB-Video
•
••
•
Blank button
The projected images switch off and
on each time this button is pressed.
•
••
•
Zoom button
Setup Guide
•
••
•
(Illumination) button
All buttons on the remote control
illuminate when this button is pressed.
The button illumination switches off
automatically after about 10 seconds
have passed.
•
••
•
Focus button
Setup Guide
•
••
•
Pattern button
Setup Guide
Displays a selection menu for
selecting a test pattern.
•
••
•
Remote control light-emitting area
Setup Guide
Outputs remote control signals.
Source
TW200-E.book Page 5 Monday, September 1, 2003 5:19 PM