Filter
Top Products
34
Configuration Menu Functions
This turns the trigger function on and off to determine whether the projector's power on/off status and
problems with projector operation are communicated to an external device.
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
A fan is set at a certain speed of rotation so as to bring down internal temperature.
When using above an altitude of about 1500m, set to "On".
This should be set in accordance with the method used to set up the projector.
• Front : Select when the projector is set up in front of the screen.
• Front/Ceiling : Select when the projector is set up in front of the screen and suspended from a ceiling.
• Rear : Select when the projector is set up behind the screen.
• Rear/Ceiling :
Select when the projector is set up behind the screen and suspended from a ceiling.
Press , , and to specify the position for the menus to be displayed.
Selects the color for the main configuration menu.
This sets whether the following message displays appear (On) or don't appear (Off).
• Image signal, colour mode, aspect
and item name when memory settings are retrieved.
• Messages such as when no image signals are being input, when an incompatible signal is input, and
when the internal temperature rises.
Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.
This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On)
or not displayed (Off).
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-
Video] input port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being projected occurs even
though "Auto" has been selected, select the correct signal format manually.
Change this setting depending on the type of signal that is being output from the video equipment that is
connected to the [Component] input port.
If "Auto" is selected, appropriate signal is automatically set. If colours appear unnatural even though
"Auto" is selected, select appropriate signal name in the menu.
Trigger Out
High Altitude Mode
Projection
Display
Menu Position
Menu Color
• Color 1:Black • Color 2:Blue
Messages
Display Background
Startup Screen
Input Signal
Video Signal
Component