Filter
Top Products
44
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Aspect Ratio" from the
"Video" menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.56)
2
Press the [ ] and [ ] buttons
to set the aspect ratio to either
"4:3" or "16:9", and then press
the [Enter] button.
3
After making the adjustment, press the [Menu] button to exit
the configuration menu.
When images in squeeze
mode are projected at 16:9
When images in squeeze
mode are projected at 4:3
: Return : Select
/
Video Signal
Color Mode
Select [Theatre ]
Video
Audio
Setting
Advanced
About
Position
Adjust
Brightness
Contrast
0
0
Color 0
Tint
Sharpness 0
Aspect Ratio
Reset
Execute
Reset All
+
-
+
-
0
+
-
Select [Auto ]
4
:
316
:
9
+
-
+
-
:
:
:
:
:
:
: Set
: Return : Select
/
Video Signal
Color Mode
Select [Theatre ]
Video
Audio
Setting
Advanced
About
Position
Adjust
Brightness
Contrast
0
0
Color 0
Tint
Sharpness 0
Aspect Ratio
Reset
Execute
Reset All
+
-
+
-
0
+
-
Select [Auto ]
4
:
3 16
:
9
+
-
+
-
:
:
:
:
:
:
: Set
Functions for Enhancing Projection