Filter
Top Products
Connecting to a Computer
■ ■ ■ ■ ■
■
27
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio 1 jack on the projector. (Use the Audio
2 jack if you are connecting a second computer.)
2. Connect the other end of the audio cable to the audio-out
port on your PowerBook.
♦ Note: After you turn on the projector and computer, you’ll need
to choose Mirroring in the Display Control Panel if you set up
your configuration to display on the LCD screen as well as the
projector screen.
Connecting to a High-End Workstation
The EMP-9000/9000NL/8000/8000NL are capable of
remapping input resolutions up to 1280 × 1024 pixels. Since
1280 × 1024 pixels is the default resolution for most leading
workstations, this capability makes these projectors the best
portable solution for the display of workstation video output.
There is no standard for workstation video output. Those
workstations that follow the SXGA standard and use the
HD15 connector don’t need an adapter cable. The most
popular workstations use a 13-pin 13W3 connector, which
requires an adapter cable. Ask your dealer.
Audio 1 jack
audio cable