Filter
Top Products
Connecting to a Computer
■ ■ ■ ■ ■
■
29
For component video, use the BNC type cable that came with
your video source. The illustration below shows the S-Video,
component, and composite connectors.
To connect a video source to the projector:
1. Turn off the projector and video source if they are on.
2. If your video source uses a small, round, one-prong
composite (RCA) video connector, you’ll need the RCA
video cable that comes with the projector. If your video
source uses a large, round, four-prong S-Video connector
or a BNC type connector, you will need to purchase the
appropriate cable or use the cable that came with your
video source.
3. For Composite Video, connect the yellow RCA plug on
one end of the RCA video cable to the projector’s Video
jack. Connect the other yellow RCA plug to the video-out
jack of your video source.
4
2
3
1
S-Video
4-pin, mini-DIN
component
BNC connector
composite
RCA
RCA video cable
RCA audio cable