Epson EMP 5600 Projector User Manual


 
Adjusting the Projection Position - 47
Adjusting the Projection Position
The projector can be adjusted into the following vertical projection positions.
Feet adjustments
Adjust the projection angle of the projector.
1
Lift the Foot Adjust Lever with a finger and raise the front part of the projector.
The Front Foot will protrude.
2
Remove your finger from the Foot Adjust Lever, and then let go of the projector.
3
Rotate the lower part of the Front Foot to minutely adjust the height.
Point
· There are cases where the screen will be distorted into a trapezoid shape when foot
adjustments are performed. Adjust the trapezoid distortion with the keystone correction
function (see page 49
)
· The Front Foot is restored by lifting the Foot Adjust Lever with a finger and lowering the
projector.
Foot Adjust Lever
Becomes lower
Becomes higher