Epson EMP 5600 Projector User Manual


 
82 - When the Indicators provide No Help
The image is dark
No sound
Is it time to replace the lamp?
The lamp indicator blinking notifies the user that it is time to replace
the lamp. When the time to replace the lamp draws near, the image
will appear dark and the tint will deteriorate. In this event, replace the
lamp with a new one.
see page 87
Has the image brightness been correctly adjusted?
see page 67
Has the contrast been correctly adjusted?
see page 67
Has the sound input been connected correctly?
see page 33
, 37
Has the image for which sound is required been selected?
see page 43
Is sound being emitted from connected equipment?
Confirm the sound from connected equipment, etc.
Has the volume been turned right down?
see page 62
Has the volume been set to the minimum?
see page 62
Has the [A/V Mute] function been left on?
There is a possibility that the [A/V Mute] mode is in effect.
Press the [A/V Mute] button, adjust the volume, or display the menu
to cancel the [A/V Mute] status.
see page 55
Is the sound being output to external speakers?
Sound will not be output from the projector's speaker if a stereo mini-
jack has been connected to the Audio Out port.