Epson EMP 5600 Projector User Manual


 
Menu Operations - 69
Effect Bar Sets the color, direction and width of the bar allocated to the
[4] button on the remote control unit.
Press the [Enter] button and select the required item from the
bar setup menu. The color, direction and width can be
selected independently for each of the settings between 1
and 3.
·The [4] button executes the bar function. The bar types will
be switched between 1 and 3 sequentially for each time the
[4] button is pressed. (see page 60
)
Individual
settings
between types 1
to 3
Cursor Speed Selects the speed of Cursor.
L: Slow M:Medium H:Fast
M
Reset Returns all effect menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to
the default settings. (see page 71
)
-
Set-
ting
Keystone Adjusts images which appear trapezoidal.
·The screen will be reduced in size when keystone correction
has been performed.
·The status of the keystone correction will be recorded.
Perform readjustments that match the installation position
when the projector position or angle have been changed.
·Reduce the sharpness if blurring occurs after keystone
correction. (see page 67
)
Center value (0)
P in P Sets the input source for the P in P functions sub-screen.
·The P in P function is executed by pressing the [PinP]
button on the remote control unit. (see page 61
)
Composite
No Signal Msg The status for [No Image Signal Input] and other message
display.
·The user logo must be registered and set up before it can be
amended.
Blue
Prompt Sets whether to display the input source on the screen or not. ON
A/V Mute Sets up the screen status for when the [A/V Mute] button is
pressed.
·User logos must be registered and set up before they can be
amended.
Black
Computer2 Sets the mode for the input image signals connected to the
Computer2/Component Video port.
RGB : Set when the input is a RGB signal.
YCbCr :Set when the input is a component video signal
(YCbCr).
YPbCr : Set when the input is a component video signal
(YPbCr).
RGB
To p
Menu
Sub Menu Function Default Value