Epson G6470WU Projector Accessories User Manual


 
Setting Options Description
BNC Sync Termination Sets the termination for the signal
from the BNC port (normally
should be off unless analog
termination such as for switchers
is necessary)
Remote Control Type Normal Select Normal to use the remote
control that came with the
Simple
projector or Simple to use a
different Epson projector remote
control and disable the remote
control that came with the
projector
Inv Direction Button Enable this setting if you installed
the projector on a ceiling and
want to invert the arrow buttons
on the control panel
Startup Source Search Automatically detects the image
signal when you turn on the
projector
A/V Mute Release A/V Mute Select A/V Mute if you want to
use only the A/V Mute button to
All
turn off A/V mute, or select All to
use any button to turn it off
Beep Turns on or off the beep that
sounds when you turn the
projector on or off
Lens Type Various lens model numbers Select the model number for the
attached lens
Instant Off Enabled Select Enabled to place the
projector into standby status after
Disabled
power off or Disabled to send
the projector into standby status
approximately 3 minutes after
power off
190