Epson G6470WU Projector Accessories User Manual


 
Power light Lamp Temp light Filter light Status and solution
light
On Off Off Flashing Low air flow through the projector.
orange
Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
Clean or replace the air filter.
If the problem persists, unplug the
projector and contact Epson for help.
Red Off Off Red Low air flow through the air filter.
Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
Clean or replace the air filter.
If the problem persists, unplug the
projector and contact Epson for help.
On Flashing Off Off The lamp is past its replacement period and
orange needs to be replaced to avoid damage. Do
not continue using the projector.
Red Off Flashing red Off A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson
for help.
Red or flashing Flashing Flashing red Off Internal projector error or air exhaust vent
red red error. Turn the projector off, unplug it, and
contact Epson for help.
Light status Flashing Flashing Off When transferring settings between
varies orange orange rapidly projectors, the settings file may be corrupt or
rapidly the USB flash drive or USB cable may not
be properly connected. Remove the flash
drive or cable, unplug the power cord, and
try again.
216