Epson G6470WU Projector Accessories User Manual


 
Projector Light Status
Related tasks
Unlocking the Projector's Buttons
Solutions to Problems with the Remote Control
If the projector does not respond to remote control commands, try the following solutions:
Check that the remote control batteries are installed correctly and have power. If necessary, replace
the batteries.
Make sure you are operating the remote control within the reception angle and range of the projector.
Make sure the projector is not warming up or shutting down.
Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release
the button to wake the remote control up.
Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the
projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.
Make sure the optional remote control cable set is not attached to the projector's Remote port. If you
leave the cable connected to the port, the remote control cannot control the projector.
If available, turn off one of the remote receivers in the projector's menu system, or check if all the
remote receivers were turned off.
If you assigned an ID number to the remote control to operate multiple projectors, you may need to
check or change the ID setting (feature not available with all projectors).
Make sure the Remote Control Type setting in the Extended menu is set to Normal if you are using
the remote control that came with the projector.
If you lose the remote control, you can order another one from Epson.
Parent topic: Solving Projector or Remote Control Operation Problems
Related references
Projector Feature Settings - Settings Menu
Optional Equipment and Replacement Parts
Remote Control Operation
226