Epson G6470WU Projector Accessories User Manual


 
If you are using the ECO Power Consumption setting, try selecting Normal or Temp Interlock in the
projector's menus.
Position the projector close enough to the screen.
If the image has been progressively darkening, you may need to replace the projector lamp soon.
Parent topic: Solving Image or Sound Problems
Related concepts
Projector Lamp Maintenance
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu
Solutions to Sound Problems
If there is no sound when you expect it or the volume is too low or high, try the following solutions:
Adjust the projector's volume settings.
Press the A/V Mute button on the remote control to resume video and audio if they were temporarily
stopped.
Press the Source Search or Search button to switch to the correct input source, if necessary.
Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
Check the audio cable connections between the projector and your video source.
If you do not hear sound from an HDMI source, set the connected device to PCM output.
Make sure any connected audio cables are labeled "No Resistance".
If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac
supports audio through the HDMI port. If not, you need to connect an audio cable.
If you want to use a connected audio source when the projector is off, set the Standby Mode option to
Communication On and make sure the A/V Settings options are set correctly.
You must connect external speakers to the projector to hear sound (PowerLite Pro G6870/G6970WU).
Make sure the Audio Settings option is set to the correct audio port for your video device.
If you turn the projector on immediately after turning it off, the cooling fans may run at high speed
momentarily and cause an unexpected noise. This is normal.
224