Filter
Top Products
The Interface Boards
Installing the board
There are two basic types of interface board designs-the frame
ground (FG) wire is attached for one type and not attached for the
other. This difference does not affect the operation of the interface
in any way.
1.
If the interface board comes with an FG (frame ground) wire
that is not already attached to the board, attach the wire as
shown below on the left.
FG wire not attached
2.
Carefully place the interface board next to the printer as shown
below. Use the CG screw to connect the round end of the FG
wire to the main board.
A-6
Appendix