Filter
Top Products
Operating the Control Panel
Lights
POWER:
READY:
PAPER OUT:
ON LINE:
Buttons
ON LINE:
FORM FEED:
LINE FEED:
On when the power switch is on and power is
supplied.
On when the printer is ready to accept data.
This light flickers during printing.
On when the printer is out of paper.
On when the printer can receive and print data
from the computer. If this light flickers,
the
print head is overheated. In this case, the printer
waits until the print head cools and then
resumes printing.
This button controls the printer’s on line/off line
status. When the printer is on line, this light is
on and the printer can receive and print data
from the computer.
When the printer is off line, press this button to
eject a single sheet of paper or advance
continuous paper to the top of the next page.
When the printer is on line, press this button to
select the Letter Quality font. See the section in
this chapter on selecting a font.
When the printer is off line, press this button to
feed the paper one line, or hold it down to feed
paper continuously. When the printer is on line,
press this button to select the Draft font.
Using the Printer 3-3