Filter
Top Products
Chapter 6
Command Summary
This summary contains all the commands used by the printer. If a
command has no parameters, it is merely listed. If it has parameters,
they are explained. The parameters are indicated by lowercase
italicized letters, usually n. The examples below show how the
parameters are indicated.
ESC @ is a command with no parameters.
ESC U l/0 is a command that uses 1 to turn the feature on and 0 to
turn it off.
ESC $ nl n2 is a command with two parameters.
ESC D nn is a command with a variable number of parameters.
ASCII Dec. Hex.
Description
Printer Operation
ESC @
64 40
DC1 17
11
DC3
19 13
DEL
127
7F
ESC <
60 3C
ESC U l/0
85 55
ESC EM n
25
19
ESC= 61 3D
ESC >
62 3E
Initialize Printer
Select Printer
Deselect Printer
Delete Character
Select Unidirectional Mode (one line)
Turn Unidirectional Mode On/Off
Control Cut Sheet Feeder Mode
4: Turns mode on
R: Ejects a sheet
0: Turns mode off
Set MSB to 0
Set MSB to 1
Command Summary 6-1