Filter
Top Products
Cause What to do
The imaging cartridge may be near the end of its service
life.
If the message on the LCD panel or in EPSON Status Monitor
indicates that the imaging cartridge is near the end of its service
life, replace the imaging cartridge. See “Replacing Consumable
Products” on page 147.
For Windows users, you can also check the remaining service life
of the imaging cartridge by looking at the Basic Settings tab in
the printer driver.
There may be a problem with imaging cartridge. Replace the imaging cartridge. See “Replacing Consumable
Products” on page 147.
The Density setting may be too dark.
In the printer driver, click Extended Setting on the Optional
Settings tab, and then lighten the Density setting.
The non-printed side of the page is dirty
Cause What to do
Toner may have spilled onto the paper feed path. Clean internal printer components by printing three pages with
only one character per page.
Print quality decreased
Cause What to do
The printer cannot print in the required quality level
because of insufficient memory, and the printer lowers
the quality automatically so that the printer can continue
printing.
Check to see if the printout is acceptable. If not, add more memory
for a permanent solution or lower print quality temporarily in the
printer driver.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this setting
to Off.
EPSON AcuLaser M8000 Series User's Guide
Troubleshooting 193