Filter
Top Products
Table 8 Special Characters/Symbols
[781~
{
1
[7c1
I-I
f
cl
6
I
I
[7D1~
}
6
ii
j
[7E]
H
-
”
P
9. Control Codes
Various kinds of control codes are contained in Tables 6 and 7.
These control codes are recognized by the MX-80 F/T, and the Printer performs
specified functions upon receipt of these codes.
The following are descriptions of respective control codes.
(1) CR (Carriage Return)
When the CR code is transmitted to the print buffer, all data stored in the
print buffer is printed.
(When AUTO FEED XT (Pin No. 14) is at “LOW” level or DIP switch pin 2-2
is ON. the paper is advanced one line automatically after printing.)
NOTE: When 80 columns of print data (including spaces) are continuously re-
ceived and the following data is valid and printable, the Printer automati-
cally begins to print the data stored in the print buffer. In this case, if AUTO
FEED XT is at “LOW” level or DIP switch pin 2-3 is ON, the paper is
advanced one line after printing.
-34-