Filter
Top Products
Using Single Sheets
7.
Press the ON LINE button to set the printer on line.
WARNING: Never use the platen knob for paper
feeding except in case of a paper jam or other paper
feeding problem. Use of the platen knob may affect
the loading and short tear-off positions. If you need
to adjust the position of the paper after it is loaded,
use the micro-adjustment feature described in the
section on adjusting the loading position in Chapter 3.
Reloading during printing
When you print a document more than one page long using
single sheet paper, the printer stops printing when it reaches
the bottom of the paper.
When this happens, either the ON LINE
light goes off automatically or it may remain on, depending on
your application software.
If the ON LINE light remains on, the
first thing you should do is press the ON LINE button to take the
printer off line.
Once the ON LINE light is off, remove the sheet that has just been
printed (if necessary, press the FORM FEED button to eject the
page) and load a new sheet. Press the ON LINE button to start
printing the next page and follow any additional prompts from
your software.
Paper Handling 2-7