Filter
Top Products
4
■ Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) for
installing the printer software
■ For parallel connection: a high-speed, bidirectional, IEEE-1284 compliant
parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male
connector for your computer and a 36-pin, Centronics
®
compatible connector for
the printer
For USB connection: a computer running Windows 98 with a Windows 98
compliant USB port and a shielded USB “AB” cable from Series A (computer) to
Series B (printer), up to 6.5 ft. (2 meters) long.
Using an improperly shielded USB cable—especially a cable
more than 6.5 ft. (2 meters) long—may cause the printer to
malfunction.
Macintosh System Requirements
To use your printer and its software, your system should have:
■ An Apple
®
iMac
™
series or Power Macintosh
®
G3 or later with USB port
■ For iMac: Mac
®
OS 8.1 or later
For Power Macintosh G3 or later: Mac OS 8.5.1 or later
If you have an iMac, you may need to update your operating
system before installing your printer software:
■
If your iMac is running OS 8.1, you must install iMac
Update 1.0
■
If your iMac is running OS 8.5 or 8.5.1, Apple recommends
that you install iMac Update 1.1
Download the update for your system from Apple at
http://swupdates.info.apple.com. Contact Apple if you have
problems installing the update.
To find out which operating system your iMac is running, select
About This Computer from the Apple menu.