Filter
Top Products
Maintenance 202
Paper is fed while the d button is pressed. If the paper is not soiled, cleaning is
complete.
Cut the paper after cleaning is done.
See “Manual cut method” on page 39.
Cleaning inside
1. Make sure the printer is turned off and the screen has turned off, and then unplug the
power cable from the electrical outlet.
2. Leave the printer for a minute.
3. Open the printer cover and use a soft, clean cloth to carefully clean away any dust or
dirt inside the printer.
Thoroughly clean area (a), shown in blue in the illustration below. To avoid spreading
the dirt, wipe from the inside to the outside. If there is a serious dirt problem, clean it
using a soft, clean cloth dampened with a mild detergent. Then, wipe the inside of the
printer with a dry, soft cloth.
Important:
O Be sure not to touch the roller or the ink absorbing areas (b, shown in gray) during
cleaning; otherwise, prints may be soiled.
O Be careful not to touch the ink tubes inside the printer, otherwise, the printer may
be damaged.