Filter
Top Products
Basic Operations 46
The paper will be fed into the printer.
5. Check the media type.
The display shows the type of paper currently selected with the printer. To print at
current settings, press the d/u buttons to highlight Keep Settings Above and press
the OK button. To change settings, highlight Change Settings and press the OK
button. See “Viewing and Changing Media Settings” on page 53.
Removing Cut Sheets
This section describes how to remove cut sheets when printing is complete.
Buttons that are used in the following settings:
1. Confirm that Paper Eject is displayed in the control panel. Then, keeping a hand on the
cut sheets to prevent them falling from the printer, press the OK button.
2. The paper will be fully ejected from the printer and can then be removed by hand.
Note:
To remove paper that was loaded but not used, press the
( button and select Remove Paper.