Filter
Top Products
Introduction 9
O Use only the power cord that comes with this product. Use of another cord may result
in fire or electric shock.
O Do not use a damaged or frayed power cord.
O If you use an extension cord with this product, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord’s ampere rating.
Also, make sure the total ampere rating of all devices plugged into the wall outlet does
not exceed the wall outlet’s ampere rating.
O Do not attempt to service this product yourself.
O Unplug this product and refer servicing to qualified service personnel under the
following conditions: The power cord or plug is damaged; liquid has entered the
product; the product has been dropped or the cabinet damaged; the product does not
operate normally or exhibits a distinct change in performance.
O If damage occurs to the plug, replace the cord set or consult a qualified electrician. If
there are fuses in the plug, make sure you replace them with fuses of the correct size
and rating.
When using this product
O Do not put your hand inside this product or touch the ink cartridges while printing.
O Do not move the print heads by hand; otherwise you may damage this product.
O Always turn the product off using the Power button on the control panel. When this
button is pressed, the Power light flashes briefly then goes off. Do not unplug the power
cord or turn off the product until the Power light stops flashing.
When handling the ink cartridges
O Keep ink cartridges out of the reach of children and do not drink the ink.
O If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them
immediately with water.
O Before installing the new ink cartridge in the printer, shake it gently for about five
seconds.
O Use the ink cartridge before the date printed on its package.
O Use up the ink cartridge within a year of installation for best results.