Filter
Top Products
Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
141
Advanced Settings
Roll Switch
Condition
*1
Paper Type Type Match
*
From the following options, select the condition under which to
switch to another roll for printing when the current roll has run
out.
O Type Match: Switch to the other roll for printing only when
the paper type specified in the job and the paper type of the
other roll are the same.
If a different type of paper has been loaded on the other roll,
an error appears, and the printer cannot print.
O Disable: Print even when the paper type is different.
Disable
Paper
Length
Print Length
*
From the following options, select the conditions when you want
to switch in consideration of roll paper remaining and print
length (length of one page of a print job).
Note that if Roll Paper Remaining is Off in the Paper menu, this
setting is disabled regardless of its configuration.
O Print Length: If both Roll 1 and Roll 2 have enough paper
remaining for the print length, print using the roll with the
lower remaining amount. If the remaining amount of one
roll is shorter than the print length, print using the other roll.
O Remaining Amount: Print using the roll with the lower
remaining amount regardless of the print length.
O Disable: Print using the roll currently in use regardless of the
remaining amount or print length.
Remaining
Amount
Disable
Paper
Width
Best Fit
*
From the following options, select the conditions when you want
to use the roll paper that reduces print margins in consideration
of roll paper width and print job length (the value of Document
Size of the printer driver).
O Best Fit: Compare the roll width of Roll 1 and Roll 2 and the
width of the print job, and then print using the roll with the
smaller print margin.
O Width Match: Print using the roll with a width that matches
the width of the print job.
O Disable: Print using the roll currently in use regardless of the
roll paper width or print job width.
Width Match
Disable
Print Job
Priority
*3
Roll In Use Select the print job priority when there are several waiting jobs:
print jobs that can be printed by the roll currently in use, switch
to another roll, and then print the remaining jobs (Roll In Use) /
Print jobs in the order they were received (In Order). When the
setting is In Order, automatic roll switching operations may be
frequent depending on the settings of the print jobs, and this
may increase the overall print time.
In Order
*
Item Description
Roll Paper Tension 1 to 5 (3
*
) This setting is used if one of the following settings are configured to
Extra High: Paper menu > Custom Paper Setting > Roll Paper Tension
or Printer driver's Paper Configuration > Roll Paper Tension.
If wrinkles are formed on the paper during printing when the
abovementioned Roll Paper Tension is High, set it to Extra High, and
then configure the strength of the tension using this setting.
Higher values produce higher tension.
Item Description