Filter
Top Products
APPENDIX
APPENDIX A General Specifications
1. Printing specifications
(1) Print method:
Thermal line printing
(2) Dot density:
180 dpi
(3) Printing direction:
Unidirectional with friction feed
(Manual reverse feeding is impossible)
(4) Print width
(TM-T60/T60P): 54mm, 384 dot positions
(TM-T80/T80P): 72mm,512 dot positions
(5) Characters per line(TM-T60/T60P): 32 (Font A)
: 42 (Font B)
(TM-T80/T80P): 42 (Font A)
: 56 (Font B)
(6) Character spacing:
0.28 mm (Font A)
0.28 mm (Font B)
Programmable by control command.
(7) Printing speed
(TM-T60/T60P): Approx. 12 lines/second (1/6 inch
feed)
: Approx. 18 lines/second (1/9 inch
feed)
: Approx . 2.0 inches/second
(TM-T80/T80P): Approx . 9 lines/second (1/6 inch
feed)
: Approx . 13 lines/second (1/9 inch
feed)
: Approx . 1.5 inches/second
: Printing speed may slow down de-
pending on the data transmission
speed and combination of control
commands.
-59-