Filter
Top Products
Note: If you connected a game console, it may take a few seconds for your image to appear. To reduce
the lag time, set your game console's input signal to a progressive signal of 480p or 720p. See your
game console documentation for instructions.
Parent topic: Connecting to Video Sources
Related references
Projector Setup Settings - Extended Menu
Input Signal Settings - Signal Menu
Related tasks
Connecting to a Video Source for Sound
Connecting to an S-Video Video Source
If your video source has an S-Video port, you can connect it to the projector using optional S-Video
cables and a splitter that supports S-Video signals.
Note: If your video source has two S-Video ports, you may not need a splitter.
1. Connect an S-Video cable between your video source's S-Video output port and the splitter.
2. Connect an S-Video cable between each projector's S-Video port and the splitter.
Note: If you connected a game console, it may take a few seconds for your image to appear. To reduce
the lag time, set your game console's input signal to a progressive signal of 480p or 720p. See your
game console documentation for instructions.
31