You can specify that the test be performed one time only or any number
of times in the range from 1 to 9999. Running a test multiple times is for
reliability testing of essential functions only; in most cases, running a test
only once is sufficient.
To perform the test once only, press
1
then
Enter.
The program displays
a submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press 2 and Enter. You see this
prompt:
Terminate checking if an error detected (Y/N)?
Press
Y
and
Enter
to terminate checking if the device produces an error, or
press
N
and
Enter
to repeat the tests regardless of an error.
Y
OU
see this prompt:
How many times (1-9999) :
Type the number of times you wish to repeat the test, then press
Enter.
The
tests for the device now start.
Resuming from an error
If an error occures during a test, the test stops at that point, and an error
code and error message are displayed. If you want to record the problem,
you can print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error
IIICSS;I~~T,
press
N
and
Enter.
Before
1.(x1
request
a
printwt,
he
sure
your printer is turned on and
on-line, and
tllc
p;ipcr
is installed correctly. Then press
Y
and
Enter.
If the
printer
is not
ready,
the
follo\ving
message and prompt arc displayed:
Printer
is not installed correctly.
Install correctly and enter Y, or
Enter
N
to cancel printing.
Correct the
ix-oblcm
axd
press
Y
am1
Enter
tc,
continue printing, or press
N
and
Enter
to
I
x~cl
printing.
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to
the menu.
