Filter
Top Products
Configuration and Management
memory and will be lost when rebooting the system or when power is
disconnected.
To view only a selection of the log events in the list, select a filter level from
the “Display” list. Available log levels are “Alarms only” and “All”. The
“Alarms only” log level corresponds to the Alarm indicator on the Ericsson
W21 unit and the information in the “ALARMS” section on the Overview
page.
Click Refresh to update the list with new information. The most recent logs
are listed at the bottom of the list.
2.10.1 Persistent Logging
If persistent logging is enabled, the log files are written to flash memory in
two alternating files meaning they will remain after a system restart or
power failure.
Note: Persistent logging should only be used for debugging purposes
since it consumes flash memory.
To enable this feature, select the “Persistent logging” check box on the
Event Log page and click Apply to save the setting.
2.11 Change Password
On the Change Password page the password used for logging in to the
web pages can be changed. For security reasons you are recommended to
change the preconfigured password.
Figure 45 - Change Password page
Type the current password in the “Current Password” field. If it is the first
time you change the password, the password is user.
1/1551-CRH 102 167 Uen Rev F 2008-07-09
59